AI Integration in Automotive Packaging Engineering for Multi-Constraint Component Optimization

Authors

  • Sowmya Ala Ford Motor Company, Dearborn, Michigan, USA Author

DOI:

https://doi.org/10.56830/IJSIE202613

Keywords:

Artificial Intelligence, Machine Learning, Automotive Packaging, Optimization, Genetic Algorithms

Abstract

This paper introduces a framework for the packaging of components in a vehicle's threedimensional structure that is grounded in evidence and reproducible when taking advantage of the potential of artificial intelligence (AI) tools. The public OSU–Honda CarHoods10k dataset provides over 10,000 3D hood-frame designs based on 109 parameterized designs, along with design parameters and finite element (FE) performance data. The data package is about 45.66 GB, including design parameters and finite-element (FE) performance data. This dataset is not a multi-component vehicle-layout dataset and can't be used for a complete validation of a vehicle packaging optimizer: thermal, service access, or assembly data of the vehicle are not available at the component level. The studies of published adjacent work have shown that an improved solution with 3 times less computational budget could be offered, a result specific to this study but not predicted for automotive packaging. The proposed framework formalizes the placement variables, geometric constraints, engineering constraints, a model of screening by an artificial neural network (ANN), and a genetic search by NSGA- II, where the two objectives change. It also defines a controlled validation protocol to manual and rule-based baselines. There are no new vehicle-program performance gains since no proprietary vehicle-program layout dataset, executable code, or experimental logs for auditing were provided. The applicable vehicle-program specifications and relevant standards should supply acceptance limits.

References

Amirpour, M., Feng, E., & A. Entezari. (2026). “A hybrid CFD–machine learning framework for efficient permeability prediction in 3D-printed bone scaffold design,”. Materials Today Communications*, Art. no. 114992, 2026. https://www.sciencedirect.com/science/article/pii/S2352492826003764.

Ayoob, K., Elahi, H., Zafar, T., Hamza, A., & Z. Wang. (2025). “Surrogate modeling for time-dependent reliability analysis of robotic manipulator trajectories,”. PLOS ONE, vol. 20, no. 9, Art. no. e0331502, 2025. https://journals.plos.org/plosone/article/file?id=1.

C. J. Freitas. (2020). “Standards and methods for verification, validation, and uncertainty assessments in modeling and simulation,”. Journal of Verification, Validation and Uncertainty Quantification, vol. 5, no. 2, Art. no. 021001, 2020. https://www.academia.edu/download/70078838/vvuq_005_02_021001.pdf.

Choi, J. B., Nguyen, P. C., Sen, O., Udaykumar, H. S., & S. Baek. (2023). “Artificial intelligence approaches for energetic materials by design: State of the art, challenges, and future directions,”. Propellants, Explosives, Pyrotechnics, vol. 48, no. 4, Art. no.

e202200276, https://onlinelibrary.wiley.com/doi/pdf/10.1002/prep.202200276 .

Colella, G., Lange, V. A., & F. Duddeck. (2024). “Transfer learning for crash design,”. Discover Mechanical Engineering, vol. 3, no. 1, Art. no. 26, https://link.springer.com/article/10.1007/s44245-024-00059-2.

G. Waters. (2025). “Testing, evaluation, verification and validation (TEVV) of digital twins: A comprehensive framework,”. arXiv preprint, arXiv:2507.04555, https://arxiv.org/pdf/2507.04555.

Huang, C., Li, Y., & X. Yao. (2020). “A survey of automatic parameter tuning methods for metaheuristics,”. IEEE Transactions on Evolutionary Computation, vol. 24, no. 2, pp. 201–216, https://ieeexplore.ieee.org/iel7/4235/9051613/08733017.pdf.

Iooss, B., & P. Lemaître. (2015). “A review on global sensitivity analysis methods,” in. Uncertainty Management in Simulation-Optimization of Complex Systems: Algorithms and Applications, pp. 101–122. https://arxiv.org/pdf/1404.2405.

Jakeman, J. D., Barba, L. A., Martins, J. R., & T. O’Leary-Roseberry. (2026). “Verification and validation for trustworthy scientific machine learning,”. Machine Learning: Science and Technology, vol. 7, no. 2, Art. no. 025055, 2026. https://iopscience.iop.org/article/10.1088/2632-2153/ae59ec/pdf.

Kelmendi, A., & G. Pappas. (2025). “AI-driven optimization of functional feature placement in automotive CAD,” . Algorithms, vol. 18, no. 9, Art. no. 553, https://www.mdpi.com/1999-4893/18/9/553.

Kudela, J., & R. Matousek. (2022). “Recent advances and applications of surrogate models for finite element method computations: A review,”. Soft Computing, vol. 26, no. 24, pp. 13709–13733, https://dspace.vut.cz/bitstreams/39dbd464-fa83-4717-87eb-2a8.

Li, X., Alharbi, M., Gammelli, D., Harrison, J., Rodrigues, F., Schiffer, M., et al. (2026). “Reproducibility in the control of autonomous mobility-on-demand systems,”. IEEE Transactions on Robotics, https://arxiv.org/pdf/2506.07345.

Liu, L., & T. Wang. (2025). “Optimizing urban last mile delivery efficiency through dynamic vehicle routing heuristics and traffic flow analysis,”. Scientific Reports, vol. 16, no. 1, Art. no. 483, 2025. https://www.nature.com/articles/s41598-025-29861y_reference.pdf .

Mehta, U. B., Eklund, D. R., Romero, V. J., Pearce, J. A., & N. S. Keim. (2016). Simulation Credibility: Advances in Verification, Validation, and Uncertainty Quantification. NASA Technical Publication

NASA/TP-2016-219422, https://ntrs.nasa.gov/api/citation.

Owoyele, O., Pal, P., Torreira, A. V., Probst, D., Shaxted, M., Wilde, M., et al. (2022). “Application of an automated machine learning-genetic algorithm (AutoML-GA) coupled with computational fluid dynamics simulations for rapid engine design optimization,”. International Journal of Engine Research, vol. 23, no. 9, pp. 1586– 1601, https://arxiv.org/pdf/2101.02653 .

Padhi, A. P., Chakraborty, S., Chakrabarti, A., & R. Chowdhury. (2024). “Deep learning accelerated efficient framework for topology optimization,”. Engineering Applications of Artificial Intelligence, vol. 133, Art. no. 108559, https://www.sciencedirect.com/science/article/pii/S0952197624007176.

Pappalardo, C. M., Magaldi, T., Masucci, L., Regina, R. L., & A. Naddeo. (2024). “Virtual prototyping, multibody dynamics, and control design of an adaptive lift table for material handling,”. Journal of Applied and Computational Mechanics, vol. 10, no. 4, pp.

659–693, https://jacm.scu.ac.ir/article_19005_b164b8c8c0edca0bd7748490013cc79b.pdf.

Ponticelli, L., Farroni, F., Genovese, A., Dell’Annunziata, G. N., Timpone, F., & A. Sakhnevych. (2025). “Vehicle state-based control for modern automotive platforms: Bridging research and industrial applications,”. IEEE Access, vol. 13, pp. 199932– 199970, https://ieeexplore.ieee.org/iel8/6287639/10820123/11261635.pdf.

Sethuraman, G., Schwarz, M., Maxl, S., Ongel, A., Lienkamp, M., Ng, H. W., et al. (2020). “Development of an overall vehicle sizing and packaging tool for autonomous electric buses in the early concept phase,”. SAE International Journal of Commercial Vehicles, vol. 13, no. 1, pp. 23–42, https://saemobilus.sae.org/articles/development-overallvehicle-sizing-packaging-tool-autonomous-electric-buses-early-concept-phase-02-13- 01-0002.

Stabile, P., Ballo, F., Gobbi, M., & G. Previati. (2024). “Multi-objective structural optimization of vehicle wheels: A method for preliminary design,”. Optimization and Engineering, vol. 25, no. 2, pp. 1025–1050, https://link.springer.com/content/pdf/10.1007/s11081-023-09833-9.pdf.

Wang, H., Fu, T., Du, Y., Gao, W., Huang, K., & Z. Liu. (2023). “Scientific discovery in the age of artificial intelligence,”. Nature, vol. 620, no. 7972, pp. 47–60, https://drive.google.com/file/d/1kgkCsnYSdbRFiNoSnR5_ajwr4DtGc65t/view.

Wei, K., Vaze, V., & A. Jacquillat. (2020). “Airline timetable development and fleet assignment incorporating passenger choice,”. Transportation Science, vol. 54, no. 1, pp. 139–163, https://papers.ssrn.com/sol3/Delivery.cfm?abstractid=3198882.

Weise, T., & Z. Wu. (2023). “Replicable self-documenting experiments with arbitrary search spaces and algorithms,” in. Proc. Companion Conference on Genetic and Evolutionary Computation, Jul. 2023, pp. 1891–1899. https://dl.acm.org/doi/pdf/10.1145/3583133.3596306.

Yoo, S., Lee, S., Kim, S., Hwang, K. H., Park, J. H., & N. Kang. (2021). “Integrating deep learning into CAD/CAE system: Generative design and evaluation of 3D conceptual wheel,”. Structural and Multidisciplinary Optimization, vol. 64, no. 4, pp. 2725–2747, . https://arxiv.org/pdf/2006.02138.

Yuan, C., Jong, S. M., & W. D. van Driel. (2024). “AI-assisted design for reliability: Review and perspectives,” in. Proc. 25th Int. Conf. Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems (EuroSimE), Apr. 2024, pp. 1–12. https://ieeexplore.ieee.org/abstract/document/10491447/.

Downloads

Published

2026-11-11

Issue

Section

Articles